parallax background

Firmware Updates

Use PC or Mac version of Z CAM Controller to upgrade as follows:

  • Download update.zip and save it.
  • Make sure that camera is connected to a stable power source throughout the upgrade process.
  • Connect the camera to the computer with Ethernet cable and open Z CAM Controller software, then connect to the camera in the software.
  • Select “Upgrade” from “Action” of Z CAM Controller, use the firmware file (.zip) downloaded and follow on screen instructions.
  • Verify the individual camera firmware version in Info after upgrade process is fully completed.
Firmware Upgrade using Z CAM web client:

  1. Connect Z CAM E2 to the computer through an Ethernet cable.
  2. Menu -> Connect -> Network -> ETH. Mode -> Direct
  3. Read the ETH. IP 10.98.32.1 (normally).
  4. Open your browser on computer and enter: http://10.98.32.1/www/html/controller.html
  5. Z CAM web client screen would show up.
  6. Go to Upgrade, select the firmware file and follow the step to complete.

* MAKE SURE THAT CAMERA IS CONNECTED TO A STABLE POWER SOURCE.
** MAKE SURE THAT FIRMWARE FILE IS NOT UNZIPPED BY THE BROWSER (SAFARI IS NOT RECOMMENDED) DURING THE DOWNLOAD PROCESS.
Z CAM E2 Firmware Update
See Latest Updates

Z CAM E1 Firmware Update
Download version 0.31
Download version 0.30
Download version 0.28
Z CAM V1 Firmware Update
Download version 0.55

Z CAM V1 Pro Firmware Update
Download version 0.55
Z CAM S1 Firmware Update
Download version 0.79
Download version 0.76
Download version 0.73
Z CAM S1 Pro Firmware Update
Download version 0.63
Download version 0.60
Download version 0.57
Z CAM K1 Pro Firmware Update
Download version 0.55
Download version 0.51